Industrial 1/4"-20 (UNC) Right Angle Rivet Nut And Threaded Insert Installation Tool - ISO 9001:2015 Certified, CE Compliant
Introduction
Master Palm right angle rivet nut and threaded Insert Installation Tool with 500 rpm free speed provides an easy way to install rivet nut and threaded insert without extra efforts. The tool delivers pull action to install threaded nuts directly without extra tool.
Right angle nut installation and pull setter tool, 1/4"-20 size, is reversible with simple direction valve trigger design. 500 RPM free speed for industrial use. Quickly install rivet nut and threaded inserts.
The right angle nut setters use rear exhaust for better performance during operation.
After a period time of usage, users are advised to replace excessive thread wear mandrels with a high-quality socket head cap screw.
Size Matching Chart
Industrial grade rivet nut installation tools allow tool users to install threaded insert easily without using too much strength or other tools. Just cling onto it and press, the tool will put the threaded nut and set for a complete installation. All rivet nut installation tools are ISO 9001:2015 certified with CE bookmarked. Industrial pneumatic rivet nut installation, the nut pull setter, operates on compressed air. Each tool comes with three years of limited repair warranty.
| Metric Coarse | Metric Fine | BSF/BSW | UNC | UNF |
| M6 x 1 | M6 x 0.75 | 1/4" | 1/4-20 | 1/4-28 |
Demonstration Video
| SKU | 71710-UNC |
|---|---|
| Item Name | UNC 1/4"-20 Right Angle Rivet Nut And Threaded Insert Installation Tool, 500 Rpm |
| air pressure | 90 psi/6.21 bar |
| angle height | total height (mandrel included) : 3.885" total height without mandrel: 3.125" low height: 1.5 "/38 mm |
| exhaust | rear |
| free speed | 650 rpm |
| horsepower | 0.5 hp/0.38kw |
| hose size | 3/8"/9.52 mm |
| noise rating | 81 dba |